01
Dust formation of concrete
SL Sealer
When the floor of a warehouse, parking lot, or bridge deck is out of service for even a few hours, it results in direct losses. SL Sealer addresses this issue. This reactive wear-resistant sealant from GCP Applied Technologies based on ESSELAC® resin hardens in less than an hour, after which the surface can withstand vehicle traffic and loads.
Operational Loads
As a standalone sealant for concrete and asphalt floors, SL Sealer works where the substrate suffers from typical operational loads. For example, on an unprotected concrete surface, dust gradually accumulates, and the sealant prevents dust formation. The floor is also prone to wear over time due to vehicular loads and foot traffic, and the coating provides abrasion resistance. Additionally, a common household situation, such as liquid spills, often occurs in places like warehouses. The liquid is absorbed into the porous substrate, causing stains. SL Sealer protects the substrate from penetration. It is also used in conjunction with GCP's anti-slip flooring systems to retain the filler and extend the service life of the coating, maintaining cleanliness and the aesthetic appearance of the surface.
02
Abrasion under movement
03
Liquid penetration and stains
Material Features
SL Sealer is a two-component reactive sealant that contains no solvents and is fully reactive. It is supplied in pre-measured kits, ready for mixing on-site, and can be applied with a brush, roller, or airless spraying. The surface can be matte or glossy, in clear or colored versions.
Key conditions for successful application:
The substrate must be clean, dry, and structurally sound, free of cement milk and contaminantsNew concrete — at least 14 daysSlabs at ground level require an effective barrier against moisture and priming with PAR1 or PA1
Quality application is performed only by authorized and trained contractors — training is provided by GCP
If it is crucial for a bridge or overpass to quickly return the surface to operation, SL Sealer provides just that: wear-resistant, chemically and UV-resistant protection for concrete and asphalt floors, ready to withstand vehicle traffic just an hour after application.
Product Advantages
Advantage 1
Hardens quickly — minimal downtime
Advantage 2
Can be applied almost all year round: in the range of -20°C to +40°C
Advantage 3
Excellent chemical and abrasive resistance
Advantage 4
High resistance to UV radiation and weather effects
Advantage 5
Typical consumption — 0.3–0.5 kg/m² (depends on the porosity and roughness of the substrate)
Documents
| DOCUMENT NAME | Type | Format |
|---|---|---|
| SL SEALER | Технічний паспорт | PDFDownload |
contact form
Need a consultation?
Our engineers will select the optimal solution for your object